Set M10 Double

Artikelnr.: PVM102V
EAN Nr.: 4260377560965

inkl. 16% MwSt. zzgl. Versand
Gewicht: 0.18 kg


Security lock for following solid axle hubs and track hubs with M10 x 1 thread like:

  • Rohloff TS Speedhubs
  • SRAM Automatix   
  • NuVinci / Enviolo n330, n360 or n380
  • Miche Primato Pista rear

Lock for both sides.



2 closures M10, 1 Pit key for solid axles, 1 code card


to installation guide (solid axles)



The protruding thread is supposed to stick out of the dropout for approximately 14mm.

The locking ring requires a space (supporting surface) of 15 mm in the radius or rather 30 mm in the diameter around the thread, so that the Pitlock lock can be installed safely. In case the protruding thread is too short, it is necessary to use an axle stub with a long threaded axle (available from Rohloff, article no.: 8235L Axle Plate TS OEM).


Unfortunately, the system for solid axles (SH38, SH90 and M10) can not be produced with the same coding as the M5/M6 systems of 
Quick releases and thru axles.

The coded nut of solid axles is much bigger than the coded nut for M5/M6 axles.

As a result, the PIT key of the solid axle systems must of course be bigger.



Our solid axle systems are combinable!

So, if you have a Shimano solid axle dynamo hub on your front wheel and a Rohloff solid axle or a Shimano Alfine/ Nexus on your rear wheel, it is possible to secure these two hubs with the same coding.