Why PITLOCK?
PITLOCK secures your bike components. Our innovative locks can be installed in minutes and reliably protect high-quality parts such as wheels, seatpost, handlebar, fork, brakes, lights and drivetrain against theft – no electronics, pure mechanics.
This is a replacement axle for existing PITLOCK users. Coded nut and code ID card are not included – you will need your existing code to place the order.
Contents:
Material: Aluminium and stainless steel
The installation width is the distance between the two outer contact surfaces of the axle at the frame or fork. This measurement – not the hub width – is the key factor when selecting the correct PITLOCK thru axle.
Use our handy thru axle reference scale to measure easily.
| Specification | Value |
|---|---|
| Hub standard | 15 × 110 mm (also: 15 × 110 mm for SA Suntour 15AH2-110 forks) |
| Axle diameter | 15 mm |
| Installation width | 110 mm |
| Total length | 151 mm (without locking head) |
| Thread length | 20 mm |
| Thread pitch | M15 × 1.5 mm |
| Required contact surface | Ø 19 mm |
| Weight | 85 g |
| Installation example | For forks with threaded receptacles |
Important: Please compare the measurements with your original axle or the bicycle manufacturer's specifications to ensure the Pitlock thru axle is compatible.
Pitlock also offers the following thru axles:
Not only the coded nut protects against theft but also the particularly designed spring washer. It anchors with our coded nut and locks the closure. In order to undo the system the Pit key is used. The Pit keys side panels press and turn the springs of the spring washer at the same time, a principle comparable to child safety locks on certain medicine bottles. Thanks to this principle on the one hand and to the chamfered coded nut on the other hand, pliers will not have a chance to break our system. In addition the conical security ring is pivoted so that it can not be cut by using force.
PITLOCK is made of certified, high-quality and stainless steel and 10 Nm are more than sufficient (not the case for solid axles) to stick the hub incl. the bicycles fork.
Dos and Don'ts to make it more difficult for thieves to succeed
Dos
Dont's
Secure your removable bicycle parts, such as the wheels, the seat, the ahead system and the brakes with PITLOCK, so that the valuable individual parts are also secured against theft.
We would be happy to receive additional hints from you.
The PITLOCK standard axles replace customary quick releases and are suitable for most bicycles. Racing bikes are special and not a standard. Since race bikes are thinner it results that the axles protrude unfortunately.
Even though we offer a broad range of several axle lengths, we are not able to cover all sizes. At best you measure the axle first, or you contact us for our advice.
The axle thread can only be shortened with the help of a hacksaw.
Attention: Please be very careful when shortening the axle.
In case the axle thread protrudes the security rings for approximately 5 mm it is possible to install our elegant end caps.
A saddle axle SA 33 with closure weighs approximately 25 gr.
A front wheel axle VA 119 with closure weighs approximately 41 gr.
TA rear wheel axle HA 155 with closure weighs approximately 47 gr.
A Pit key weighs approximately 11 gr.
A set 02 with packing weighs approximately 176 gr.
- 5 min - simple handling
- stainless steel - weatherproof
- reorder worldwide - code registration
