0

Shop

  • Ahead Security

    22.90 €
    Ahead Security

    article: Individual coded Ahead Security, fitting to all available Pitlock Systems. Repurchase to secure the Ahead Front part and the bike fork. material: high quality, stainless steel content: aluminium plug, teflon washer, coded M6 screws function: The aluminium plug is a part of the Pitlock Ahead Security.The lowered position of the plug safes the coded head of the M6 screw. variations: 1 1/8 " (standard sizes) in black art. nr. PNCGB00 or silver art. nr.: PNCGS00 special sizes on request: 1 ¼ " 1 ".   !order only possible with code number!

  • Alu Flat Cap for Solid Axles

    Optical completion and protection from dirt and direct acces for the Pitlock solid-axle security (M9, M10 or 3/8") or Pit-Boat.  

  • Coded nut for solid axles

    Coded nut M10/ SH38/ SH90 for Rohloff solid axles! Art. Nr. PVS10CM Art. Nr. PVS90CM Art. Nr. PVS38CM SH90 for Shimano solid axles! SH38 for Shimano solid axles!   Repurchase to Pitlock closure for solid axles.  material: high quality, stainless steel function: The coded nut is a substantial part of thePitlock closure.    !Order only possible with code number!

  • Coded nut M5

    6.90 €
    Coded nut M5

    article: coded nut, repurchase to Pitlock closure for M5 Pitlock axles, individually coded material: high quality, stainless steel function: The coded nut is a substantial part of the Pitlock closure. The special form defines the coding.  !Order only possible with code number!

  • Combo-Set Shimano

    81.90 €
    Combo-Set Shimano

    function: Secures the front wheel solid axle oft he Shimano hub dynamo with a M9 x 1 thread and the Shimano rear wheel axis Alfine or Nexus with a 3/8 inch thread. A closure fort he front and the back each. Since the outer coding ist the same both nuts can be opened with the same Pit-key. content: 1 closure M9  x 1, 1 closure 3/8 inch, 1 Pit-key for solid axles, 2 code cards  installation guide (solid axles) important: The protruding thread is supposed to stick out of the dropout for approximately 14mm. The locking ring requires a space (supporting surface) of 15 mm in the radius or rather 30 mm in the diameter around the thread, so that the Pitlock lock can be installed safely. attention: The two Pitlock systems for quick releases and for solid axles possess two different measurements. Due to the different thread sizes the keys of the two Pitlock systems are not combinable. The closures for M5 and M6 are a lot smaller than those of the “thick” solid axles. Our solid axle systems are combinable! So, if you have a Shimano solid axle dynamo hub on your front wheel and a Rohloff solid axle or a Shimano Alfine/ Nexus on your rear wheel, it is possible to secure these two hubs with the same coding.

  • Dropout

    23.90 €
    Dropout

    article: 1 Pitlock dropout security axis material: high quality, stainless steel, teflon content: 1 Pitlock axis M5 with head, continous thread and closure plus M8 threaded sleeve. measures: Entire length without head 30 mm, max. installation width 200 mm, sleeve M8 10 mm long. function: Secures the unscrewable dropouts by using a M5 axis and a M8 threaded sleeve. Repurchase to secure unscrewable, vertical dropouts.   Individually coded, amteches the available Pitlock system!   !Order only possible with code number!   It is sufficient, to exchange only one of the four screws on the unscrewable dropout with the Pitlock security.

  • Front wheel axle with lock

    article: front wheel axis with head and closure material: all Pitlock axles are made of high quality, certified, stainless steel, teflon function: The Pitlock axles replace the quick releases and secure the valuable components against theft. Repurchase single security axles with individual codings to the existing Pitlock system. Each Pitlock axle has a thread of approximately 25 mm. The axles diameter is about 5 mm (M5). FW = Front Wheel installation width = 19 mm standard art. nr. PNCA119 130 mm art. nr. PNCA130  

  • Front wheel axle without lock

    article: Front wheel axle with head, without closure material:   all Pitlock axles are made of certified, high quality, stainless steel function: The Pitlock axles are a substitute for quick-release or rather removable axles. In connection with the Pitlock closure, the valuable bike components are protected against theft. Every axle has a thread of about 25 mm. The axle diameter is 5mm (M5). The axle designation has the maximal installation width, which is the entire axle length of 10 mm that the closure requires. Variation: FW: Front wheel installation width = 119 mm standard Art. Nr. PNOA119 -          130 mm Art. Nr. PNOA 130

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
SOME OF OUR PRODUCTS
  • article: 1 Pitlock dropout security axis material: high quality, stainless steel, teflon content: 1 Pitlock axis M5 with head, continous thread and closure plus M8 threaded sleeve. measures: Entire length without head 30 mm, max. installation width 200 mm, sleeve M8 10 mm long. function: Secures the unscrewable dropouts by using a M5 axis and a M8 threaded sleeve. Repurchase to secure unscrewable, vertical dropouts.   Individually coded, amteches the available Pitlock system!   !Order only possible with code number!   It is sufficient, to exchange only one of the four screws on the unscrewable dropout with the Pitlock security.

  • Antitheft security for all bicycle components hexagon socket screws